[Andytwodogs]

I just plasti-dipped my side panels to cover a bad repair/paint job to the rt. side. I did it as a temp fix until I can figure out what to do. I used 3 coats of matte black Plasti-Dip, then 3 clear coats over it. Without the clear coat the Plasti-dip is just to soft, it will easily peel and collect bug and dirt like crazy. Plus I doubt without clear coating it'll hold up to a boot scuff.
As for bag lid protection, you can see I use two carbon-fiber sick-on bumper guards on each bag.

My boot would certainly land between those bumper strips! I'm inclined to think this issue will be solved with those ShoreFire lid covers. Solid Black - Victory Cross Country & Magnum

 

[Andytwodogs]

Simplest solution is stop dragging boots on the lids....

I only do it occasionally, but then again you only have to do it once. I have short legs, it's gunna happen.

 

[Andytwodogs]

I have used plastidip a couple of times, not a big fan of it.

If your going to use it, Ican suggest a few tips....there's a difference spray nozzle that one of the company's sells...coats much better. Also buy the trigger handle spray attachment...makes spraying easier and more consistent. Also make sure the parts are clean. Practice first to get the hang of it. Use at least 4 coats.

If it was my parts I would just put a good coat of wax on it...scuff marks wipe right off. I like the Adam's wax brand.

Thanks Mr Maxx.....and everyone else. I can't use wax as I have matte paint. Dr Beasleys protectant is the only thing my paint sees. My options apart from plasti dip are the various saddle bag covers, or vinyl wrap, or maybe just some protectant film on the area my boot contacts.

 

[Andytwodogs]

Not overly fussed about the match. If a blind man going past on a galloping horse can't pick it, I'm ok. What I'd like to know is:
-Am I on the right track, is this a good idea?
-Does it need to be reapplied occasionally?
-Will it protect the paint from my clumsy feet?
-Is it easily removed?