I have a Victory Gunner and was looking at Memphis Shades. I could not find an application on thir website. I called the and they said they did not have a mount for the Gunner and had no intent on making one. I have seen a couple of Gunner's with them. I wonder what mounts they are using and what modifications were done
jparra830
Memphis Shades on Gunner
The Gunner and the High Ball use the same front end ... Vegas / Jackpot is completely different.
Memphis Shades says they don't make a mount for the Gunner/Highball and have no plans on making one. Has anyone been able to use a Vegas bracket and get it to work
I could design my own since i am a Mechanical Engineer. I just wanted to see if ther were any off the shelf before i did that. Maybe I can sell them...LOL.
I have looked at the gunner options and found them to be very expensive for what it is. A clamp system with brackets, much like the $300 passenger pegs with brackets. I would buy some windscreen hardware if it's equal or less than current option prices and wouldn't mind a raw finish as I would have them coated black. Looking forward to seeing either what you find or what you fab.
I don't know about Memphis Shades, but SlipStreamer has a couple windshields that fit.
I just ordered
Slipstreamer SS-30 Classic Windshield - 22in. - Clear SS-30-22CV
and the wide-glide quick release kit (this kit is a brand new product - they tell me that I will have the 1st one)
I got it in chrome, but it also comes in black (even the windshield cross bars are black)
It will be a few days before it gets here, but I will post pics.
In the mean time - you could go look at this link for that windshield installation on a Judge (without the new quick release bracket).
.
Slipstreamer windshield - Judge
.
.
I just ordered
Slipstreamer SS-30 Classic Windshield - 22in. - Clear SS-30-22CV
and the wide-glide quick release kit (this kit is a brand new product - they tell me that I will have the 1st one)
I got it in chrome, but it also comes in black (even the windshield cross bars are black)
It will be a few days before it gets here, but I will post pics.
In the mean time - you could go look at this link for that windshield installation on a Judge (without the new quick release bracket).
.
Slipstreamer windshield - Judge
.
.
False alarm.
Got the Slipstreamer SS-30-22 Classic windshield with the wide glide quick release mounting hardware via UPS today.
It almost fits. lol
Here's a photo of the mounting bracket. There's a bolt thru the bottom hole but the top isn't quite wide enough to stretch to the top mounting hole. Also, positioned like this, the windshield is in contact with the speedometer.
Things would be a lot easier if they made a speedometer relocation bracket.
As it is, I'll probably fabricate something to make it work.
EDIT: I fabricated three different potential solutions. Each of these brought the windshield farther out enough to clear the speedometer, but made the mounts a bit too flimsy for my tastes. I put the SlipStreamer windshield back in the box and up on the shelf. Will use it for something else.
I called the company and they were very interested in pictures, so I emailed them some. He said that this bracket fit everything they they tried it on. hahahahahahahaha I guess they didn't try it on a Gunner, now did they?
.
.
![Image]()
Got the Slipstreamer SS-30-22 Classic windshield with the wide glide quick release mounting hardware via UPS today.
It almost fits. lol
Here's a photo of the mounting bracket. There's a bolt thru the bottom hole but the top isn't quite wide enough to stretch to the top mounting hole. Also, positioned like this, the windshield is in contact with the speedometer.
Things would be a lot easier if they made a speedometer relocation bracket.
As it is, I'll probably fabricate something to make it work.
EDIT: I fabricated three different potential solutions. Each of these brought the windshield farther out enough to clear the speedometer, but made the mounts a bit too flimsy for my tastes. I put the SlipStreamer windshield back in the box and up on the shelf. Will use it for something else.
I called the company and they were very interested in pictures, so I emailed them some. He said that this bracket fit everything they they tried it on. hahahahahahahaha I guess they didn't try it on a Gunner, now did they?
.
.
That seems to be the issue with the Gunner/Highball most people don't realize that the front end width is different. The picture is not coming through.
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
