[Chuckz71]

Barracuda Customs recently responded to me stating they no longer make custom badges. I'm hearing this may be due to them going out of business... (sucks)
So any tips on where might I get a custom image engraved on a gloss black cheese wedge badge or maybe just a couple blank gloss black badges (one with key hole and one w/o)? This would be for a 2016 XCT. Thanks

 

[primethious]

You might find them on ebay, but consider spending more to get billet wedges. In the end they will look better for longer.

 

[PDXLaserGazer]

Agree with Primethious on that. However, both of the stock wedges have the key hole (they are the same part), just that there is a thin tin or aluminum plate (106) covering the right side held on by double-side tape. Lots of other great options or just ask around here. Sometimes, someone changes the stock out for some kickass billets and want to get rid of the stock wedges.

 

[Chuckz71]

Thank you for the information. I undestand both factory wedges are copies of each other. I'm just wanting custom thin badges to go onto my factory wedges that I like. I want the badge to have a cutom image to display something that is important to me. Appreciate the helps guys.

 

[Bobbyd85]

Products | victory aftermarket parts cross country cross roads

 

[PDXLaserGazer]

Maybe get one of those pictured above and some airbrushing, laser etching or vinyl designs. Probably could do pretty inexpensive if you have the artwork.

 

[Chuckz71]

Bobbyd85, while I was just wanting to swap out my badges those wedges are really nice!! I like a lot. And PDXLG, I just might get those etched later on down the road as I do have the images. A combo of the two ideas might be the final touches.

 

[Jeb27]

Barracuda Customs recently responded to me stating they no longer make custom badges. I'm hearing this may be due to them going out of business... (sucks)
So any tips on where might I get a custom image engraved on a gloss black cheese wedge badge or maybe just a couple blank gloss black badges (one with key hole and one w/o)? This would be for a 2016 XCT. Thanks

Example: Right Side Cheese Wedge Badge Gloss-116 Cubic Inch in Parts for Victory - Barracuda Customs - Featured Vendors - Featured - Your #1 Source for US Made, Custom Victory Motorcycle Parts

 

[Bobbyd85]

Example: Right Side Cheese Wedge Badge Gloss-116 Cubic Inch in Parts for Victory - Barracuda Customs - Featured Vendors - Featured - Your #1 Source for US Made, Custom Victory Motorcycle Parts

I heard that Jon at Witchdoctor may have picked up Barracuda's Victory line.

WitchDoctors.com - Victory Motorcycle Parts Supplier

 

[53canuck]

For something a bit different you might take a look at

Skyy Fire Industries - Home

 

[Jeb27]

I heard that Jon at Witchdoctor may have picked up Barracuda's Victory line.

WitchDoctors.com - Victory Motorcycle Parts Supplier

That's correct, at twice the price!

 

[Bobbyd85]

It might just be for existing product. Maybe no more custom stuff.

 

[Bobbyd85]

Well I don't know about cheese wedge replacement stickies... but I used Venom Imaging!, Gas-Infused Custom Motorcycle Parts for my cam and derby covers. They are great and you can design anything you want. Some sort of gas infused system. Haven't had any issues and had them since 2014.

 

[Jeb27]

Well I don't know about cheese wedge replacement stickies... but I used Venom Imaging!, Gas-Infused Custom Motorcycle Parts for my cam and derby covers. They are great and you can design anything you want. Some sort of gas infused system. Haven't had any issues and had them since 2014.

View attachment 196209
View attachment 196217

Nice!

 

[PDXLaserGazer]

If you can get some cheap stock badges, soak them in paint thinner overnight, give them a good rinse with cold water then do whatever your heart desires. Also check out B&L Billiards for some neat looking badges, maybe give them a call and ask if they'll sell you blanks.

 

[shanko]

If you scroll down this guy says he does customs.

Devil Girl on Table Custom Cheese Wedge Cover Badge for Victory Motorcycles | eBay

 

[Oldman47]

I heard that Jon at Witchdoctor may have picked up Barracuda's Victory line.

WitchDoctors.com - Victory Motorcycle Parts Supplier

He may have bought up their stock for a good price but when they are no longer making stuff he will run out of things sooner or later and no more custom designs.

 

[Bobbyd85]

He may have bought up their stock for a good price but when they are no longer making stuff he will run out of things sooner or later and no more custom designs.

It might just be for existing product. Maybe no more custom stuff.

Yep, That is exactly what I said...

 

[IM12STPN]

Anyone have their "100" cheese wedges? My 2016 VEGAS 8-BALL, motor by KEVIX, didn't come with them:shhh: