VOG Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
303 Posts
Discussion Starter · #1 ·
Anyone know what these wires (G&H) are for? It is the harness on the Victory Vision under RH side of seat. I put my seat back on and it crushed these wires . . . funny thing is, everything seems to be working properly. Any help would be appreciated.

Looked on diagram and it looks like LH and RH TS Output. Don't know if I read it correctly, but turn signals are working OK.

 

·
Registered
Joined
·
4,867 Posts
Its funny you did that, if indeed you disconnected the G &H wires you just did a brake mod.
What you did accidently is what i did on purpose. It changes the brake and turn signals in the back to larger turn signals with brakes. Stock, when you put the turn on it flashes the top and is very small for the brake. Not now.
You can leave it that way but make sure to tape the ends so they dont short on anything.
 

·
Registered
Joined
·
303 Posts
Discussion Starter · #4 ·
Yup!
 

·
Registered
Joined
·
303 Posts
Discussion Starter · #5 ·
Hey thanks Clubford00! That makes sense!
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top