VOG Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
15 Posts
Discussion Starter · #1 ·
I am upgrading to the Alpine SPS 510 and no matter what I do I cannot get the original screws to catch. It looks like the mounting bracket of the new speaker is thicker than the stock speaker. Has anyone had this issue? Did you have to replace it with longer screws?
 

·
Registered
Joined
·
166 Posts
Make sure the speaker is flush against the mounting surface. You may want to check the condition of the screw and that the brass insert in the speaker pod is good. I had to epoxy mine back in.
 

·
Registered
Joined
·
634 Posts
I had to buy some slightly longer screws.
 
  • Like
Reactions: NWidder
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top