Throttle cables. | Victory Motorcycles: Motorcycle Forums

Throttle cables.

Discussion in 'Victory Vegas' started by Zen3, Apr 27, 2021.

  1. Zen3

    Zen3 Active Member

    Joined:
    May 1, 2020
    Messages:
    130
    Likes Received:
    42
    Location:
    NE PA
    Type of Motorcycle Currently Riding:
    Vegas
    C27A7EB1-6245-408B-9A84-C89822F60197.jpeg 85070A28-C1EB-4219-8C9A-44B7A8B406D9.jpeg 44393DBE-7F36-4096-AF0F-884B18FAB9DA.jpeg Ok. So I bought new throttle cables a couple months ago. I knew from the start something wasn’t right. I kept adjusting them and screwing with them till the push cable was ruined. Now the pull one looks ruined also. I thought I bought the stock length. But they looked way to long when I put them on. But not knowing a normal look from abnormal I installed them. I’m not even sure if the bars are stock. Anyway the adjuster barrels on the handle bars needed to be all the way in and the barrels on the throttle body had to be adjusted all the way out to run decent. These cables have been a thorn in my side since the beginning. Here are some pics to show my issue. I want to get another set that are the right length and be done with it. Please help.
     

    Attached Files:

  2. PreachSF

    PreachSF Well-Known Member

    Joined:
    Dec 3, 2012
    Messages:
    1,675
    Likes Received:
    1,086
    Location:
    Delray Beach, FL
    Type of Motorcycle Currently Riding:
    Bullitt (07 Hammer S w/ Jackpot front end)
    contact Scott at Conquest Customs , 561-715-9494
     

Share This Page