I need a filter or I can buy the entire kit. Im in MN, 55128. Or if you know of another filter that would work, much appreciated. Im new to Victory, not used to not being able to find parts!
Joined
·
300 Posts
Welcome to the VOG @berserker1776, I am not sure where to source replacement filters for the S&S intakes. Is yours damaged in some way to need replacing?
Rob
Rob
Joined
·
2,173 Posts
Not available from S&S anymore but I'm reasonably sure the filter itself was made by K&N. Had the S&S set up on an '06 Hammer.
Like 11ZNL; said what happened to yours? They are serviceable and last indefinitely.
Like 11ZNL; said what happened to yours? They are serviceable and last indefinitely.
Joined
·
3 Posts
Well, I wanted to service the filter yesterday. Removed the seat, tank, etc... got to the filter cover and the hex bolts were spun out. Had to pull off the TB with the intake asssembly still attached. Major PIA. I took the intake to a machine shop to remove the bolts this morning. Since they no longer make these, I'd like a backup just in case.
1 - 4 of 4 Posts
Join the discussion
