VOG Forum banner
1 - 20 of 21 Posts

·
Registered
Joined
·
834 Posts
Wheelbase 65.7 inches
Width 44.9 inches on Polaris site but the 08 service manual says 45.2
Length 103.5 inches (Street)
104.9 inches (Tour)
 

·
Registered
Joined
·
4,500 Posts
wide
 

·
Registered
Joined
·
4,500 Posts
dsjr70 said:
bubba said:
Is that a question or a comment or was it your 2000th post...lol
My answer of course. She is friggen WIDE!!! :)
 

·
Registered
Joined
·
1,090 Posts

Suck it up. If you want the Vision you will have to take all of the "quirks" that go with it. In your case, that means being pretty careful when you put it in Easy-Jim's Storage and Meatlockers. Be sure to measure the door before an attempt - door width is reduced by side weatherstripping and so on.
Go for the gusto! Get a bigger storage place! You won't need a dial caliper - op sit. (Latin abbreviation)
eta moya dva rubles.
 

·
Registered
Joined
·
30 Posts
I am looking for a little more clarification on the width of the Vision. The issue I have is where is the width coming from, from the bags? Let me explain ... I have a Chevy Colorado Pickup and am thinking about buying a Rampage Loader for the bed to carry a bike in my truck when we RV. A quote of 44 or 45" has been mentioned on this string and while my overall bed with in the truck is 52", the front wheel wells only have a width of 43" that extends 25" from the front of the bed ... so I guess what I am looking for is what is the width of the front end of the bike that would be affect by these wells? What is the highest width of the bike for the first 25" or so of the bike?
 

·
Registered
Joined
·
4,500 Posts

Monkei said:
I am looking for a little more clarification on the width of the Vision. The issue I have is where is the width coming from, from the bags? Let me explain ... I have a Chevy Colorado Pickup and am thinking about buying a Rampage Loader for the bed to carry a bike in my truck when we RV. A quote of 44 or 45" has been mentioned on this string and while my overall bed with in the truck is 52", the front wheel wells only have a width of 43" that extends 25" from the front of the bed ... so I guess what I am looking for is what is the width of the front end of the bike that would be affect by these wells? What is the highest width of the bike for the first 25" or so of the bike?
Is there a dealer near by?
 

·
Registered
Joined
·
834 Posts

Widest ponit is at the mirrors. On the bottom front your widest point would be tip over to tipover.
 

·
Registered
Joined
·
30 Posts
The closest dealer is over 120 miles away. THere is a dealer in Knoxville but he has no models in stock.
So, can someone, when they have a chance, measure that distance from tip over to tip over point? Looking at the diagram, I would agree, that it would be my only issue.

Thanks.
 

·
Registered
Joined
·
4,500 Posts
37 inches best I can do by doing it myself and some tape.
 
1 - 20 of 21 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top