Joined
·
1 Posts
Was wondering if anyone knew what size bolts went into the cover on the bottom, As I noticed that there isn’t any bolts holding it in place anymore so it rattles like mad now. Any ideas?
Oil Cooler Cover Bolts
1 - 3 of 3 Posts
Joined
·
7,876 Posts
go to hardware store and try a 6mm and go from there
Joined
·
4,841 Posts
On the jackpot oilcooler there is only 1 bolt on top of the oilcooler, LH side
The bottom has a metal rail with rubber grommet, and a plastic or metal pin in the center, see picture .... So if your oilcooler is loose on the bottom and the 2 rubber grommets and pins are still in ther, maybe that is normal,
View attachment 497079
The bottom has a metal rail with rubber grommet, and a plastic or metal pin in the center, see picture .... So if your oilcooler is loose on the bottom and the 2 rubber grommets and pins are still in ther, maybe that is normal,
View attachment 497079
1 - 3 of 3 Posts
Join the discussion
