Looking for a clutch cable replacement tutorial | Victory Motorcycles: Motorcycle Forums

Looking for a clutch cable replacement tutorial

Discussion in 'Victory Judge' started by hunter3203, Jun 6, 2020.

  1. hunter3203

    hunter3203 Member

    Joined:
    Jun 4, 2016
    Messages:
    79
    Likes Received:
    25
    Type of Motorcycle Currently Riding:
    2013 Victory Judge
    The clutch cable on my 2013 Judge snapped last week and I've finally received a Barnett replacement cable. I was hoping to find a video that showed how to replace it. Witchdoctors has a lot of videos but that doesn't seem to be one. Just in trying to trace the cable, it looks like I'll need to remove the gas tank. They've got a video on that. Before I head that route, I'd love to hear from anyone who's done this before.
     
  2. 53canuck

    53canuck Well-Known Member

    Joined:
    May 25, 2013
    Messages:
    1,926
    Likes Received:
    789
    Location:
    Left Coast, Canada
    Type of Motorcycle Currently Riding:
    2011 KP
    Take the tank off and trace the cable route end to end just to see where it goes. Remove or undo any tie-downs. When you've got the existing cable loose, including the adjuster, tape the new one on to the end of the old then just pull and work it through. Take it easy so you don't yank too hard on any wiring but it's a pretty simple job.
     
  3. Duke68

    Duke68 Member

    Joined:
    Apr 26, 2016
    Messages:
    72
    Likes Received:
    32
    Location:
    Hatfield Indiana
    Type of Motorcycle Currently Riding:
    2015 Cross Country
    Chech out witchdoctor. Com when I did mine they had one.
     
  4. hunter3203

    hunter3203 Member

    Joined:
    Jun 4, 2016
    Messages:
    79
    Likes Received:
    25
    Type of Motorcycle Currently Riding:
    2013 Victory Judge
    Thanks. I did end up taking the tank off and it was pretty easy from there.
     
    • Like Like x 1

Share This Page