VOG Forum banner

LED Headlight for Steel Frame 5.75"

3023 9
Quite easy to do with just a sharp cutting tool.

Note: Careful working around the new lamp, the lens could scratch easily.
The rubber gasket just needs to be trimmed to get it to fit around the new lamp. This is with the rubber gasket trimmed. All you have to do is trim off the triangle-like fingers... You'll understand when you get in there.

The basket is not needed. I thought it was going to be needed as a spacer so I trimmed it all the way. NOT NEEDED!

From here on it's plug-n-play. Light is bright and crisp.

The best part...