VOG Forum banner

kick stand diameter?

606 views 5 replies 4 participants last post by  vision_nut 
#1 ·
Anyone know what the diameter of the kickstand shaft is on the CCT? If it's not the same the whole length, then about 2-3" from the ground.
 
#2 ·
2014 CCT 3 inches from floor 0.631"
Up by the spring: 0.711"
Measured with a digital caliper.
 
#4 ·
Now I have a ? for you.
What is the purpose of the rubber bumper on the bottom of the kick stand?
Bob
 
#5 ·
The rubber stopper is there to help catch the ground when you forget to put your kickstand up. I also noticed on my previous bike XRclassic, if the rubber bit on the kick stand wears out (and you forget to put up your kickstand) you stand a chance of breaking off a small nipple next to where the kickstand rests while up. I no longer have the bike so I can't take any pics...
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top