[twillis]

I've got a Vic 2 into 1 coming and I know I will need to cut the frame when mounting up the new pipe. I've done several exhaust installs, but none involving cutting. What do you guys use to cut it? I work at a car dealership and have an air compressor, so I can probably borrow whatever I need.

 

[Sutherland]

I used a cut-off disc on a minigrinder to do the cutting on my KP, air grinder with cutting will work alsp
REgards

 

[kevinx]

Unbolt the rail. Slap it in a vice, and use a hack saw

 

[Windnut]

I used an electric disc grinder with a zip cut wheel on it but you could use anything because it isn't really the frame just thin wall tubing to hold up the stock exhaust. I jammed a piece of stainless plate behind the tube in case I slipped with the zip cut. Also it's a good idea to mask everything around it when cutting with any power tool to stop any damage from metal shavings flying around.

 

[twillis]

OK thanks. I hadn't looked close enough to see that you coud unbolt it.