VOG Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
249 Posts

They are screwed in. There is a threaded stud protruding from the ends on the factory pegs. They can be removed with a Vice-Grip. The Kuryakyn pegs use a long bolt which runs the length of the peg rather than a stud. USe a bit of blue thread locker on the threads.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top