VOG Forum banner

Bike stand for oil changes

11585 Views 22 Replies 20 Participants Last post by  Bikesofbrads
I am looking to get some good suggestions for a simple, cheap, and fairly small bike stand/jack to help me with my oil changes. I did the first oil change on my Hammer without one and don't want to go through that again. I got it done but it was more of a pain than it should have been. Any suggestions will be helpful since I've never owned or used any type of bike stand/jack.
1 - 1 of 23 Posts
Dig a6 foot trench in the ground and have a sliding steel cover over it and drive your bike over it then slide the cover out of the way crawl in and presto change your oil.
1 - 1 of 23 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.