[TheBucket]

Need a new seat. Tried Ultimate and it set me back by an inch or so. No good.

Looking at CycleOps. Possibly Russell DayLong but they come right out and say it'll raise you by 1.5-2". With a 30" inseam, I can't do that either.

Had a Corbin on my V-Star and that was OK...wasn't thrilled. Mustang maybe?

Any thoughts besides Will @ CycleOps? Nothing against him, just looking for other options.

 

[VicVisionBulldog]

The Mustang I added to my Vision dropped me in the seat about an inch or a bit more. I like the saddle but didn't need the drop. It all works out though as I use a Airhawk often that puts me back to good. .

 

[jmstang302]

If you need a seat for the vertically challenged and comfort? You're going to have to get it custom made.

Won't Ultimate modify their seat for you or is it Russell ?

Drag Specialtys makes a low seat for the XC.

The best thing to help us VC is to narrow the sides. Victory had a low seat, I'll spot 1 maybe 2 every 6 months or so. Non-heated usually runs $300 while the heated one is $600.

 

[jmstang302]

0810-1540 Drag Specialties Low-Profile Touring Seat Victory Backrest Mild Stitch | eBay

 

[jmstang302]

Mustang One Piece Daytripper Low Profile 2 Up Seat Saddle Victory Motorcycle | eBay

 

[jmstang302]

The part number for the Victory Low seat is 2877825. You can try calling a few dealers for this one. Who knows you could HET lucky?

 

[primethious]

Sounds like you just need another layer of foam for the back support on the ultimate.
Can they do that?

 

[bobzinger]

Did you call Russells? Tell them you can't go up 1.5". I have a 30" inseam and have a Russells. I only went up 1" but lowered the bike 1" to offset.

 

[Bueller]

mustang wide. says out of box is a little lower than stock xc seat. No way it moves you back any. i had to have mine dished out a little and had it lowered and pushed back some. 30 inseam here too. its better than the Mag on long rides and better for her too.

 

[COU]

Www.cycleopsusa.com/seats

 

[Cobra Rider]

Need a new seat. Tried Ultimate and it set me back by an inch or so. No good.

Looking at CycleOps. Possibly Russell DayLong but they come right out and say it'll raise you by 1.5-2". With a 30" inseam, I can't do that either.

Had a Corbin on my V-Star and that was OK...wasn't thrilled. Mustang maybe?

Any thoughts besides Will @ CycleOps? Nothing against him, just looking for other options.

Drag Specialties makes one. I actually have one I will sell you, say $280 plus shipping. I didn't like the seat stitching look on my bike as it's flame and my bike is lightning. Just like this one but flame stitching.

DRAG SPECIALTIES SEATS LOW-PROFILE TOURING SEATS USING VICTORY OEM BACKREST

 

[PDXLaserGazer]

If he's not interested, maybe @13SicVic would be, he's looking for a new seat too. And his bike has flames.

 

[mobear66]

Need a new seat. Tried Ultimate and it set me back by an inch or so. No good.

Looking at CycleOps. Possibly Russell DayLong but they come right out and say it'll raise you by 1.5-2". With a 30" inseam, I can't do that either.

Had a Corbin on my V-Star and that was OK...wasn't thrilled. Mustang maybe?

Any thoughts besides Will @ CycleOps? Nothing against him, just looking for other options.

I have a cycle ops seat. It was a bit of a challenge some of it was Will and some of it was Mother Nature. In the end I have a seat I love and is comfy especially now that it's broken in.

 

[Cobra Rider]

If he's not interested, maybe @13SicVic would be, he's looking for a new seat too. And his bike has flames.

Thanks. Just private message with him.

 

[AL_Jazz]

Drag Specialties makes one. I actually have one I will sell you, say $280 plus shipping. I didn't like the seat stitching look on my bike as it's flame and my bike is lightning. Just like this one but flame stitching.

DRAG SPECIALTIES SEATS LOW-PROFILE TOURING SEATS USING VICTORY OEM BACKREST

View attachment 526059

I am interested in the seat if they are not. PM me please.

 

[muckers]

Will did my Magnum seat and it is incredible! Very happy with it, small error on the side panels I wanted but he rectified the error

 

[Sutherland]

Went with two piece Mustang on 08 Kingpin, And the Ultimate on my 2013 CCT like both. Regards