VOG Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
2,063 Posts
Axle bolt first. 35 lb-ft
Pinch bolts 18 lb-ft. Tighten left side first. Hold the brake and move suspension through full travel range 4 or 5 times before torquing right side and then re-torque left.

As an FYI there were two types of forks on the 2010 and 2011. MARZ and KYB.
KYB uses a threaded axle and no pinch bolts on LH fork. Different parts and oil too.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top