VOG Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
When I bought my 2004 vegas I got an extra set of fenders and tank. (originally came on the bike). I want to change them out but I have noticed a problem with the old tank. Right next to the vent tube there is a hole about the size of a nickel. From what I am told there is a plug that goes there and the hole is not used. I have looked on all the parts lists and breakdowns I can find and they all show the updated tank (having 2 vent lines). Does anyone have or know where I can get my hands on one of these plugs?
Ted
 

·
Registered
Joined
·
12,236 Posts


17518086Screw 3Usage
21014754-266Tank, Fuel, Spine, Black (50 St/Can)1Usage
21014754-341Tank, Fuel, Spine, Sonic Blue (50 St/Can)1Usage
21014754-342Tank, Fuel, Spine, Solar Red (50 St/Can)1Usage
21014754-354Tank, Fuel, Spine, Silver (50 St/Can)1Usage
21014754-1168Tank, Fuel, Spine, Red/Silver (50 St/Can)1Usage
21014754-1169Tank, Fuel, Spine (Cosmic Sun Burst/Silver)(50 St/Can)1Usage
21014754-1170Tank, Fuel, Spine (Purple Thunder/Silver/Flames)(50 St/Can)1Usage
21014754-1171Tank, Fuel, Spine (Sonic Blue/Hot Rod Flame)(50 St/Can)1Usage
21014754-1183Tank, Fuel, Spine (Black Cherry)(50 St/Can)1Usage
37517525Screw 3Usage
37517525Screw 3Usage
45134160Bushing 3Usage
45134160Bushing 3Usage
55412480Bushing, Flange 6Usage
55412480Bushing, Flange 6Usage
65412414Cover, Mount, LH 1Usage
65412415Cover, Mount, RH 1Usage
75412071O-Ring 2Usage
85133613Plug 1Usage
97710515Ring, Retaining 1Usage
105412096Grommet 1Usage
115412095Grommet 1Usage
127556193Washer 1Usage
137556192Washer 1Usage
147547186Nut 1Usage
155412093Grommet 1Usage
165411869O-Ring 1Usage
175412332Hose 1Usage
187081151Clamp, Hose 2Usage
187081151Clamp, Hose 2Usage
192520251Fitting 1Usage
207556131Washer 1Usage
215412094Grommet 1Usage
225434782Line 1Usage
235434781Line, Water Vent 1Usage
242520322Asm., Fuel Line, Filter 1Usage
252520284Pump, Fuel 1Usage
267547233U-Nut 1Usage
277556260Washer, Flat 1Usage
287517845Screw 1Usage
29-------ASM., IGNITION SWITCH/FUEL CAP [SEE IGNITION ASM. PG. C6, REF. 5]1Usage
301253363Asm., Throttle Body 1Usage
305411886Cap, Fitting 1Usage
315412259O-Ring 2Usage
321253335Adapter, Throttle Body 1Usage
337517405Screw 2Usage
341253405Injector, Fuel 2Usage
341500198O-Ring 4Usage
357670129Clip, Injector Clocking 2Usage
362520207Asm., Fuel Rail 1Usage
37-------HARNESS, JUMPER, FUEL INJECTOR
[TBODY] [/TBODY]
 

·
Registered
Joined
·
2 Posts
Discussion Starter · #4 ·
I have seen that parts breakdown. That is the new updated 2 vent line tank. In 2004 there was only 1 vent line on the original tanks. The tanks would atcually make a whining sound with the older tank installed because the vent went thru the gas fill area. Because of this they have the chance of clogging so they started making the new replacement tanks like the one pictured in the parts breakdown.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top