VOG Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 21 Results
  1. Tech Q&A
    Ok I know its from Lloydz as I can read but specifically which product and version? Background I just purchased a 2007 Hammer and this is velcro attached to the back of the battery box. I'm guessing it is a fuel controller but I do not know which one or where there is any documentation about...
  2. Victory Kingpin
    So I’m beginning to finalize my plan for adding Cams to my 04 kingpin. I already have a PC II and torque tubes. I will also install Lloyd’z VM1 cams with RPW 2-1 slash cut pipes. What all do I need to do tuning wise? How can I adjust ignition timing?
  3. Victory General Discussion
    I'm getting ready to buy a bunch of Lloydz parts for my 13 XCT, but am having a terrible time finding someone who, A: can do the install (I don't want do it myself) and, B: can also dyno tune the bike after install. I contacted Lloydz and the only authorized dealer of Lloydz near me according...
  4. Victory Vegas
    I am probably digging my own grave and should have posted here months ago. *I am not mechanically inclined* I recently just added the Lloydz Torque Tubes with K&N Filters, Lloydz Timing Gear, and a Power Commander V on my 13' Victory Vegas 8 Ball. I have not gotten it dyna tuned yet, and loaded...
  5. Tech Q&A
    I am admittedly new to the fuel injection world and a little cautious about it. My plans are to do the Lloydz LSC cams, high comp pistons, air filter and Maximus to Maggie Mae over the winter. Is anyone currently running this set-up? If so, how do you like it? Also, if anyone is running the...
  6. Victory High-Ball
    Yo what's up Vog Fam, I hope & pray yall are riding out there safely. I just wanted to seek some advice from yall regarding the Lloydz Timing Wheel. If you can see from my previous posts I already have upgraded my HB with exhaust & PCV with a custom intake etc. But when I take off in 1st gear...
  7. Victory High-Ball
    I have an Anger Management efi/tuner on my bike paired with a llyodz air box and a set of Victory Performance Straights. All this was on the bike when I bought it from the dealer. It's all fine a good, but I have noticed that I think I might need an adjustment. The Lloydz air box really sucks...
  8. Victory Octane
    Victory Octane new performance exhaust by RPW USA build with Lloydz Motor Works. Great performance 109.68hp/ 85.47 torque - Accelerate with the RPW USA "ACCELERANT"!
  9. Victory Octane
    RPW USA and Lloydz Motor Workz teamed up for a new performance exhaust design for the Victory Octane - The ACCELERANT 109.68hp/85.47 - Ready now!
  10. Victory General Discussion
    Installing Hacker pipes, Lloydz cams, Lloydz Torque Tubes with IAV, PCV, dyno tuned. Will the torque tubes alone make the bike louder, or would it sound the same with or without? Just curious if air intakes actually pump up the volume of pipes. I've always done both mods together, so never...
  11. Victory General Discussion
    How many hours of labor would it normally take to install Hacker Ripper exhaust, Lloydz Torque Tubes with IAV, Lloydz VM-1-DR cams, a PCV, and a map on a 2016 Vegas? Just a rough estimate.
  12. Victory General Discussion
    On the Witchdoctors website, there are two different types of throttle rings for sale (4 if you count the aftermarket grip versions of each). Two are the Lloydz brand, and the other two are something else. They're currently offering a free non-Lloydz ring with purchase of grips. Planning on...
  13. Victory Cross Country
    I have a 2015 Cross Country with Lloydz cams, timing wheel, air filter and VFC. Bike also has tri-oval pipes. E-mailed back and forth wit Lloydz and got recommend settings for the VFC for my set up but I had the following issues. Bogs out like it wants to stall when leaving from a stop at a...
  14. Tech Q&A
    I am adding some items to my 2015 CCT and am asking for input as what to expect performance wise. Maybe hp/tq estimates, and seat of the pants experience. Items that will be installed are tri-ovals, Lloydz air filter, dobeck Afr+ fuel controller, and Lloydz timing wheel set at +4. Thanks for...
  15. Tech Q&A
    I see these guys like LLoydz motor works, or the vic shop, and I was just wondering if anyone knew of somebody of this caliber in California anywhere? I am in Fresno, about 3 hours from LA or San Fran.
  16. Victory Vegas
    Yesterday, my buddy (and president of my club, NYC-LI Victory Riders) installed the RPW 'Slash' slip-ons, Lloydz Torque Tubes, and the VFC III (he put the adjustable timing wheel in for me last summer). I love the sound of the pipes ... and more importantly the extra 'zoom' I feel when I twist...
  17. Victory Cross Country
    I had planned on going to The Vic Shop in Adel, IA yesterday. I cleared my calendar and took the day off. I live in IL, and yesterday we had crazy 45-60mph gusts all day. Soooo I got up on 74 to make my way. Somewhere around a mile down the road, I turned my ass around and played it safe. I...
  18. Victory Cross Country
    Bought a 2016 Cross Country... I bought this bike to ride the hell out of it and have some fun. I'm planning to change the pipes to the Vance & Hines slip-ons. Since those are hi-flow, I'm planning on putting in the Lloydz Hi-Flow Air filter as well. Lastly, since I'm messing with fuel and air...
  19. Victory Cross Country
    All, I received my throttle ring from Witchdoctor's yesterday. I bought it because I liked the idea of a faster throttle response and less twist on my wrist. But I missed a big benefit I hadn't thought about. After installing it last night I went for a ride. While riding through some tight...
  20. Victory Cross Country
    Has anyone come across or developed a map for a Power Comander 5 for these components: - TriOvals - Lloydz air filter - Lloydz timing wheel It's for an otherwise-stock 2010 Cross Country. Thanks Drifter
1-20 of 21 Results
Top