VOG Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 19 Results
  1. Victory Vegas
    Hey everyone! new the forums here. I tried searching through the posts here already but was unable to find a conclusive answer. I guess my question is a multi-part question. 1. Has anyone put these bars on their Vegas? 2. If so, did you have to get new cables as well for it to fit? 3. would...
  2. Victory Cross Country
    Installing some Vicbagger handlebars on my XC tonight. Everything going good but one detail. The original bars have a hole on each side that lines up with a pin inside the controllers. The vicbagger bars have no holes. My question is, do I drill holes or snip the pins?
  3. Victory Magnum
    I decided to make them. I have them tacked up right now so I have to put them on the bike to make sure they sit and fit the way I want them to. Then I’ll take them off , make the corrections I need, finish welding and clean them up good, fit them to the bike again to be extra sure, and as long...
  4. Victory Cross Country
    Anyone have a set of 12-14 inch apes for sale? Willing to ship? Or local pick up in NJ-parts of NY. Thanks in advance
  5. Victory Vegas
    Are there such thing as after market drag bars for my 2006? Spent hours looking for some with the 5” riser spacing but no dice. Or are people just getting them fabed? If so where?
  6. Victory Octane
    I just bought my octane on May 30th and couldn't be happier. Been day dreaming about personalizing it. With that being said does anyone know where I can find handlebars shown in the picture? I've been looking everywhere (or maybe in the wrong places?) and can't seem to find handlebars that'll...
  7. Tech Q&A
    I picked up a pair of Highball handlebars for my 2004 Vegas. I need to extend the wiring and my original plan was to splice wires onto the harness coming from the controls and put new pin connectors onto the ends of the extensions to stick into the connector plug. That way I only have one splice...
  8. Victory Kingpin
    Greetings everyone! Is anyone selling any OEM floorboards? I just purchased an 09 Kingpin that the owner put pegs on. Not sure if I will need to put a different shifter or rear brake pedal on to accomodate the boards so if they come with everything I will need that would be best. Also in search...
  9. Victory Vegas
    I’m coming home next month from Iraq and my wife told me to do something with my bike so I’d stop complaining lol So bars are first on my ‘16 8-ball and basically I don’t know if it’s worth the hassle to get all the cables and wiring and so the work myself. I’m going from stock bars to 12”...
  10. Victory Kingpin
    First off, Happy Holidays to Vic & Pin Nation. I am wanting to replace my KP stock bars with the Arlen Ness chrome flybar (p/n 2878125-156) but according to Ness, they were produced for Vics and discontinued in 2010. I'm looking for help either locating this part number that you may have taken...
  11. Victory Vegas
    Can anyone tell me what kind of risers/bars these are and maybe where to get them?
  12. Victory Cross Country
    Does anyone have the Witch Doctors "Outraged" ape hangers on their XC?? I have the Arlen Ness 16" apes, but I'd like to get some that are a little taller without having to get them custom made. I'm looking for opinions on which ones would be best. I'm looking for about 18" of rise. I know the WD...
  13. Victory Hard-Ball
    Has anyone taken the apes off their Hard-Ball? I like everything about the bike except the apes . Will any Victory OEM bars work/fit on a Hard-Ball? Pics of non-ape bars would be very welcome! Ride safe.
  14. Victory Cross Country
    Gents, I am 5.11 and accustomed to using apes on a bike. The bars on my X-1 are comfortable for the most part but tend to put me in a slight slouching position, that over time irritates my lower back. (Sit up strait right). I am going to get some taller bars, 4 inches taller max, with the same...
  15. Victory Magnum
    Gents, I am 5.11 and accustomed to using apes on a bike. The bars on my X-1 are comfortable for the most part but tend to put me in a slight slouching position, that over time irritates my lower back. (Sit up strait right). I am going to get some taller bars, 4 inches taller max, with the same...
  16. Victory Cross Roads
    Ive seen a couple of threads stating that any HD springer bars will fit the cross country but I haven't found any info on internal wiring or electronic cruise control fitment anywere if anyone has any information on this I would appreciate it.
  17. Victory Hard-Ball
    Looking to switch out the mini apes on a 2013 HB. I'm only 5'7" and love to do the long distance thing more. Not looking to put XR bars on. Don't know if beach bars are my thing. What else is out there? Not sounding bitchy, just honest. Thanks people.
  18. Victory Cross Country
    I apologize if this has been covered before I couldn't find it on here but i could have missed it. Have questions regarding handlebars for my 2016 crosscountry.. I had a highball I traded in and after having the mini apes I can't stand the stock handlebars on the cross country being so low...
  19. Victory General Discussion
    I recently had the Russells seat made for my 2011 Cross Country and my butt has never been happier. They raised my rider portion up 1" and back some. At that time I also raised my handlebars up...far as they would go....cause it looked cool up there. But early on my back started getting a...
1-19 of 19 Results
Top