VOG Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-15 of 15 Results
  1. Victory Octane
    I will get my map posted up in the morning. Had the bike dynotuned with the Bassani 2 Into 1 exhaust and trask air cleaner. 127hp and 114lb/ft torque after tune. Feels like a new bike. Just ordered big bore kit. 1279cc with larger injectors and forged flat top pistons. Winter project for up...
  2. Victory Octane
    As an Octane owner and a general motorcycle enthusiast, I have owned many different bikes. I've been active on forums for all of them. And there never seemed to be a lack of cumulative resources shared. Weather it be write ups on how to do something to the bike, a mod, a tune. They were all...
  3. Tech Q&A
    Looking to see if anyone does Dyno tuning on the freedom 106 in the Chicago area. I really don't want to drive 12 hours round trip just for someone to Dyno tune my bike but I do want them to dial it in right. Any suggestions? I'm planning on doing Andrews v413 drop in cams, Lloyd's intake, a...
  4. Victory Cross Country
    Got an appointment to see Lloydz on Sept 20 for a dyno tune. It'll be the first ever dyno tune since I had cams installed. Appointment is for 11, but I am aiming to get there for 9ish and riding up with my brother-in-law (he has a 2016 Street Glide). I'll be likely leaving from Naugatuck and...
  5. Tech Q&A
    Just wanted to say thanks to the collective minds here that helped guide me in my choices for performance! Had KevinX install Lloydz LSC cams this weekend and Maximus tuner! Love the power she is putting out now! I am still going to get an underdrive pulley...and then I am going to get off of...
  6. Victory General Discussion
    So, I've been upset for a bit that I can't watch what's going on with my bike while running it, and not going to spend another 200 on a pod to log data, nor am I going to record huge video files watching the power commander program. screwing with the CAN of course it's a special dynojet...
  7. Victory General Discussion
    07 Vegas 100 freedom, 5 speed. Im getting her tuned in about 5 days. So far Ive: -Replaced TB adapter -cleaned/recharged air filter -changed plugs (ngk) and wires (taylors recommended by Half Crazy) -Cleaned TB thoroughly -Re-finish pipes with ceramic, installed new gaskets Intend to: -check...
  8. Victory General Discussion
    I'm in the metro Detroit area, in Michigan. Looking for a recommendation on a good tuner for the dyno. I've got my bike back together and I'll be ready in a few days. Any suggestions? 07 Vegas with the PCM-III. Thanks
  9. Victory General Discussion
    I've got an 07 Vic Vegas with the 100freedom. Bought it used with stock everything EXCEPT exhausts 2-2 Santa Rosa Twins (swept). Basically straight pipes - optional baffle. Bike had a stage 1 flash. Bike ran very smooth. No vibrations in throttle etc. Like anyone else, I wanted more. Over...
  10. Victory General Discussion
    Has anyone installed the Cobra Fi2000 yet? And what do you think about it? Fi2000 PowrPro Black | Motorcycle Fuel Management | Victory High Ball (12-13) | Cobra USA
  11. Victory Gunner
    Has anyone installed the Cobra Fi2000 yet? And what do you think about it? Fi2000 PowrPro Black | Motorcycle Fuel Management | Victory High Ball (12-13) | Cobra USA
  12. Indian Motorcycle General Discussion
    Went looking around and asking questions about what combo works good with the Indian 111, most said that 90hp was the top with there selected components. When I found Kyle and talked with him he used some parts that others didn't seem to use and had a good graph on what the curves looked like...
  13. Victory Cross Country
    I had planned on going to The Vic Shop in Adel, IA yesterday. I cleared my calendar and took the day off. I live in IL, and yesterday we had crazy 45-60mph gusts all day. Soooo I got up on 74 to make my way. Somewhere around a mile down the road, I turned my ass around and played it safe. I...
  14. Victory Cross Country
    I am having the "standard mods" done to my 2015 XC to include the VM1 HPT cams, timing wheel and intake form Lloyds and the PC5. The bike currently has the HOT VIC slip on exhaust and dyno'ed at 86HP and 105TQ. I am VERY excited to see the new numbers and feel the new performance. Now this...
  15. Victory High-Ball
    Went to the VMC rally in Murfreesboro, TN this past weekend to have Kyle install cams and replace my VFCIII with the PCV, followed by a terrific tune. For those who may be on the fence regarding this upgrade, take it from me, it is like getting on a different bike! Additionally, doing business...
1-15 of 15 Results
Top