VOG Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-17 of 17 Results
  1. Tech Q&A
    I have sheered the rivets that hold the clutch basket to the gear twice now , I have not found any mention of this happening to anybody else, and none of the dealerships here in San Diego that I have dealt with have seen it happen either. I know I ride hard, but surely I am not the only one...
  2. Tech Q&A
    I installed a Barnett clutch kit, pressure plate, heavy duty spring, and Lloydz primary support plate on my 2012 CCT. I soaked the friction plates 24hrs and installed everything per the service manuals instructions. My issue is that the clutch does not disengage when the clutch cable is adjusted...
  3. Victory Kingpin
    Clutch slipping ?? When I pull clutch in hear chirping sound just got bike 2010 kingpin with 5000 miles on it
  4. Victory Vegas
    New Vic owner here and hoping someone can help. I have a 2003 Vegas with about 45,500 miles on it. Put some miles on today and once she got warm I noticed a clunking noise while idling in neutral. When I engage the clutch lever it goes away, and when I release it the noise comes back. Is this...
  5. Tech Q&A
    Back in January, I decided to improve the clutch action on my 2016 Vegas by reducing the reach to the lever and to reduce the pull effort. This video shows the results of the first prototype. I'm going to try to explain this mod. Please be patient, there's a jumbled mess in my head trying to...
  6. Tech Q&A
    Anyone who knows me knows I'm a tinkerer. I love to take my bike apart and play with options. Just last night, I had some clutch concerns (over the winter I put in the Barnett pressure plate and spring to alleviate slippage (hydraulic clutch, no adjustment). Still getting slippage. Long...
  7. Victory Vision
    Ok , i am nearing the end of my rope! Does anyone know where i can get compatable parts for the hydrolic clutch master cylinder??? While riding the clutch lever broke , came apart and the internal pivot pin flew out. All that remains is the internal workings of the master cylinder and part...
  8. Other Victory Models
    I’ve researched however I can’t find a good answer. I have a 2001 V92C with just over 19k on the clock. The issue I have is warm or cold if I let the clutch out aggressively I hear a horrendous screech from somewhere. If I feather the clutch it’s fine. Also, I lose no drive during the noise so...
  9. Tech Q&A
    i recently changed the clutch in my 13 CC and now I’m having issues shifting. I previously had no issues. It’s happening mostly at a standstill. If I’m in second come to a light it won’t go down to Nuetral or first without letting the clutch out a little then back in! Any thoughts? Also if...
  10. Victory General Discussion
    Hi all. I have a 2013 Vision with the Hydraulic clutch. I have 2 issues: 1) Currently a bad case of tennis elbow is causing great arm pain when pulling the clutch lever 2) I have small hands and would find it useful to have the clutch lever a bit closer to the grip. Has anyone had any luck...
  11. Victory Vision
    Hello everyone. I have an 08 Vision that is giving me a little grief. My clutch sweet spot is all the way out at the end of the lever. It doesn't slip but if I even breath on the lever it's disengaged. I find no adjustment in the hydraulic slave. Local Victory tech rode and says" it's not...
  12. Victory Kingpin
    my MICRO CLUTCH SAFETY SWITCH just broke, what exactly does it do, and has anyone found anything cheaper than $60 bucks for this thing. thanks
  13. Tech Q&A
    Hey yall i was wondering is there anyway to readjust the clutch pack like you would on a harley? I took my cover off one day to try to do so but i had limited time to do it. Anyhow on the harleys there a big nut you loosen and in the center of that nut you use a allen wrench to tighten just...
  14. Victory Cross Country
    My 2014 XC started making a strange noise today. The bike has a little over 9000 miles on it. When I decelerate, there is a new whirring noise. If I pull the clutch in to shift, it sqeaks then rattles. I don't hear it when I accelerate (but maybe engine, exhaust and other noises drown it out)...
  15. Victory Kingpin
    Hey guys, well I have been fighting one of two problems here recently. I think it is time for a real mechanic to take a look at my 2008 Kingpin. My most immediate issue is the clutch. The pin has always given a pretty loud clunk when shifting but it seems to have gotten a good bit worse...
  16. Tech Q&A
    I recently replaced my clutch cable, it was a little tight but I got it on. I have a 2012 Vegas 8ball with the high ball bars. So my clutch cable is 1360mm. After installing my cable, the clutch doesn't fully engage and only begins to catch when the control for the cable is back to its normal...
  17. Victory Kingpin
    Good day . Need a little help, point in the right direction. I brought a 2004 Kingpin with 13k miles in the beginning of the summer . I have put about 150 miles on it and have been thru 2 fuel pumps and 3 clutch . I initial taught the clutch fail because of the wrong oil . But this time I...
1-17 of 17 Results
Top