VOG Forum banner

Forum Discussions about this Product

    1. · Registered
      Joined
      ·
      59 Posts
      I sandwiched the license plate between the backing plate and a metal license plate frame with 4 holes. I marked the holes on the backing plate and drilled the lower holes. I bolted it all together top and bottom with stainless 1/4" buttonhead hex bolts and nylocks... Seems pretty solid. I can post a pic if you like.

      The plate was in the bag with the manual, spare key, etc. The dealer should have installed it, as their little plastic "dealer logo" plate was a shredded triangle by the time I got home. :)

      BTW, heres one on Amazon just in case you get no where with the dealer...

      http://www.amazon.com/Barnett-709-8...plate frame&qid=1465345036&ref_=sr_1_9&sr=8-9
       
    2. · Registered
      Joined
      ·
      219 Posts
      Discussion Starter · #9 ·
      I sandwiched the license plate between the backing plate and a metal license plate frame with 4 holes. I marked the holes on the backing plate and drilled the lower holes. I bolted it all together top and bottom with stainless 1/4" buttonhead hex bolts and nylocks... Seems pretty solid. I can post a pic if you like.

      The plate was in the bag with the manual, spare key, etc. The dealer should have installed it, as their little plastic "dealer logo" plate was a shredded triangle by the time I got home. :)

      BTW, heres one on Amazon just in case you get no where with the dealer...

      http://www.amazon.com/Barnett-709-80-71012-License-Backing-Plate/dp/B0031BH1KM?ie=UTF8&keywords=motorcycle plate frame&qid=1465345036&ref_=sr_1_9&sr=8-9
      Thanks. Looks like a good option!
       

Forum Reviews

Be the first to review this product

Write a Review

Do you have experience with this item? Help our community members and share your knowledge.

Sign in to add review

Top